×
Product Introduction
Coiling Machine
Coiling Machine is mainly used for springs with different wire diameters, outer diameters and winding ratios, and the length of the springs can be adjusted. The equipment adopts closed-loop control to realize spring wire tight winding, gap winding, variable diameter winding, double wire parallel winding or multiple wire parallel winding, etc.
Category:
Coiling Machine
contact us
Product Description
Coiling Machine is mainly used for springs with different wire diameters, outer diameters and winding ratios, and the length of the springs can be adjusted. The equipment adopts closed-loop control to realize spring wire tight winding, gap winding, variable diameter winding, double wire parallel winding or multiple wire parallel winding, etc.The equipment adopts a closed-loop control system to monitor the winding speed and winding tension in real time during the operation of the equipment to ensure the consistency of each spring coil. Spring wire material is not limited, such as stainless steel wire, Nitinol wire, platinum alloy wire, gold wire, applicable wire diameter is more than 0.01mm, spring minimum diameter of 0.15mm wire (surface can be coated). Spring is suitable for medical intervention guide wire, cardiovascular and cerebrovascular spring coil winding.
Equipment parameters
Supply voltage |
AC220V; 50Hz |
Maximum power |
1800W |
Coling range |
300-1800mm |
Suitable wire diameter |
0-0.29mm |
Detective winding tensicn range |
0-294N |
Feed speed accuracy of main module of winding spring |
0.05mm/s |
Roset pston xcn of the wire feinmeld set |
±0.02mm |
Spindle speed |
0-6000转/分钟 0-6000r/min |
Warbing stroke of wire tension mold set |
40mm |
Industrial camen Piovels |
2million pixels |
Magnification of kens |
7X-300X |
Sceen sine |
15 "(man-machine interface)19" (micrograph) |