×
Product Introduction
Balloon forming machine CZBFM3300
The CZBFM-3300 series Balloon Forming Machine blows the balloon tube through heat radiation, and finally forms a balloon. Balloon Forming Machine integrates tension system, temperature control system, and pressure system into one, forming a multi-loop closed-loop system, which feeds back the operating parameters of the equipment in real time and automatically adjusts the system internally according to the set parameters.
Category:
Balloon forming machine
contact us
Product Description
The CZBFM-3300 series Balloon Forming Machine blows the balloon tube through heat radiation, and finally forms a balloon. Balloon Forming Machine integrates tension system, temperature control system, and pressure system into one, forming a multi-loop closed-loop system, which feeds back the operating parameters of the equipment in real time and automatically adjusts the system internally according to the set parameters.
Equipment parameters
| Equipment model |
CZBFM-3300 |
| Supply voltage |
AC210-230V; 50Hz |
| Maximum power Input air source |
1400W(According to the size of the water jacket) |
| Air source |
Clean high-pressure nitrogen and compressed air |
| High pressure nitrogen P1 |
≤6.9Mpa |
| Compressed air P2 |
0.5Mpa≤P2≤0.7Mpa |
| Ambient humidity |
20-75%(Non-condensing) |
| Ambient temperature |
5~55°C |
| Balloon forming pressure medium |
High-pressure nitrogen |
| Balloon shaping output pressure range (nitrogen) |
0~6.9Mpa |
| Heating temperature range of balloon forming mold |
0~150°C |
| Axial linear temperature uniformity of straight die |
±2°C |
| Ra Roughness of iner surface of fat die and end die Ra |
0.4 |
| SuApplicable balloon length |
0~300mm |
| Applicable balloon outer diameter |
Φ2~Φ8mm(customizable) |
| Control system |
Programmable automatic control |